KitchenAid Appliance Repair Abilene TX

Stand Mixer Motor Failures. Dishwasher Control Board Issues. Refrigerator Not Cooling. Same-Day Service — (325) 331-4829

📞 (325) 331-4829 — Same-Day Available
⚙️ KitchenAid error codes diagnosed with tools — not guesses 🔍 Artisan & Professional series specialist ✓ Free to Call 👑 OEM KitchenAid Parts 💲 Quote before we touch anything
What We See in Abilene: KitchenAid appliances are premium-priced — but that doesn’t make them immune to real failures. KitchenAid dishwashers in Abilene accumulate hard water scale (about 14 grains per gallon) on spray arms and heating elements faster than most brands. KitchenAid refrigerators develop evaporator ice blockage and control board faults in our 100°F+ summers. Before recommending any major repair, we test every component systematically. Many “dead” KitchenAid appliances have a single fixable part.

What KitchenAid Problem Brought You Here?

❌ KitchenAid Dishwasher Not Cleaning / Won’t Drain

KitchenAid dishwashers in Abilene suffer from hard water scale blocking spray arm holes and clogging the filter assembly. Control board faults cause wash cycle errors. Door latch failures prevent the machine from starting. We test water pressure, spray arm flow, drain pump, and control board before recommending any part. Most KitchenAid dishwasher repairs run $95–$275.

🟙 KitchenAid Refrigerator Not Cooling

KitchenAid French door and side-by-side refrigerators develop evaporator coil ice blockage from defrost system failures. Evaporator fan motor failures, control board faults, and compressor relay issues all cause cooling loss. Abilene’s summer heat stresses sealed systems. We run a full diagnostic — compressor, sealed system pressure, defrost cycle, fans — before quoting any repair.

🚶 KitchenAid Stand Mixer Not Running / Motor Issues

KitchenAid stand mixer motor carbon brush wear is the most common Artisan and Professional series failure. Symptoms: mixer runs slow, smells like burning, or won’t start. The worm gear and planetary assembly also wear in heavy-use machines. We diagnose the full drive system before recommending parts. Most stand mixer motor repairs run $85–$165 — far less than a new mixer.

💥 KitchenAid Range / Oven Not Heating

KitchenAid electric range bake element failures, oven temperature sensor drift, and control board lockups are the most common oven calls in Abilene. KitchenAid gas ranges develop igniter failures and gas valve coil faults. We stock most common KitchenAid range parts and typically complete oven repairs same day. Call us before buying a replacement.

🔆 KitchenAid Washer Won’t Drain / Error Codes

KitchenAid front-load washers share a platform with Whirlpool and develop drain pump failures, door boot seal leaks, and control board faults. F/E error codes indicate drain circuit issues or motor problems. We diagnose the full system before recommending any part. Most KitchenAid washer drain repairs run under $245.

🏭 KitchenAid Dryer Not Heating

KitchenAid electric dryers most commonly fail at the heating element, thermal limiter, or high-limit thermostat. Gas dryers develop igniter and gas valve coil failures. All are stock OEM parts. We test the full heating circuit rather than replacing parts by guesswork. Most KitchenAid dryer heating repairs run $90–$260.

KitchenAid Appliance Repair Abilene TX: What We Fix

Dishwashers & Stand Mixers

  • Dishwasher control board & door latch
  • Spray arm & filter assembly (hard water)
  • Drain pump & wash motor
  • Heating element (dishwasher)
  • Stand mixer carbon brushes & motor
  • Worm gear & planetary assembly
  • Speed control board (mixer)
  • Bowl lift mechanism

Refrigerators, Washers & Ranges

  • Evaporator fan & defrost heater (fridge)
  • Compressor relay & capacitor
  • Ice maker assembly & water valve
  • Control board (fridge)
  • Washer drain pump & door boot seal
  • Bake & broil element (range)
  • Oven temperature sensor & control
  • Dryer heating element & thermal limiter

KitchenAid Repair vs. Replace — Abilene Cost Guide

ProblemTypical Repair CostNew KitchenAidVerdict
Dishwasher control board$195–$340$800–$2,000✓ Fix it
Dishwasher drain pump & latch$80–$245$800–$2,000✓ Fix it
Stand mixer motor & brushes$85–$165$450–$700✓ Fix it
Fridge evap fan & defrost$130–$260$1,200–$3,000✓ Fix it
Bake element (range)$110–$195$700–$2,000✓ Fix it
Washer drain pump$145–$245$700–$1,500✓ Fix it
Dryer heating element$150–$260$600–$1,000✓ Fix it

Estimates for Abilene TX. Exact quote given before any work starts. Parts + labor included.

Why Abilene KitchenAid Owners Call Us

OEMGenuine KitchenAid parts whenever possible
$0Surprise charges — quote first, fix second, always
LocalAbilene technician — not a 1-800 call center
Same DayMost KitchenAid repairs completed same day in Abilene

KitchenAid Appliance Repair Abilene TX FAQ

My KitchenAid dishwasher won’t start and shows a control panel error. Is the board bad?
Not always. A failed door latch assembly sends no “door closed” signal to the control board, which prevents any cycle from starting — and looks exactly like a dead board. We always test the door latch, thermal fuse, and float switch before condemning the control board. A door latch replacement is $85–$145. A control board replacement is $195–$340. We quote which part it is after diagnosing — not before.
My KitchenAid stand mixer smells like it’s burning and runs slow. Is the motor gone?
In most cases, the carbon brushes are worn down. Carbon brushes are wear items inside the motor that carry current to the armature. When they wear down, the motor runs weakly, smells like burning, and eventually stops. Replacing the carbon brushes is an $85–$130 repair. Full motor replacement runs $140–$200. We diagnose which it is before quoting. Most Artisan and Professional 5 Plus mixers are worth repairing — the base and gear housing are high-quality and last for decades with proper maintenance.
My KitchenAid fridge isn’t cooling but the freezer seems fine. What’s wrong?
This is a classic defrost system failure. When the defrost heater or defrost thermostat fails, ice builds up on the evaporator coils in the freezer. The evaporator fan can no longer push cold air through the ice blockage into the fresh food compartment — so the freezer stays cold but the fridge warms up. The fix is defrost heater replacement ($130–$260) or defrost thermostat ($95–$190). We test the full defrost circuit before recommending any part. Abilene’s hard water can also cause evaporator fan blade scale buildup that blocks airflow.
Is it worth repairing a KitchenAid dishwasher with hard water damage?
In most cases, yes. Hard water damage to spray arms and filters is manageable — we clean the spray arm ports and replace the filter assembly as part of the repair. Scale on the heating element reduces efficiency over time but rarely causes immediate failure. The bigger question is whether the control board or pump are good. If those are functioning, a thorough cleaning and seal replacement can restore a KitchenAid dishwasher to full performance. We’ll give you an honest assessment after diagnosing. Abilene’s hard water is real — but it’s manageable with the right maintenance.

KitchenAid Breaking Down in Abilene?

We diagnose first — no surprise charges. OEM KitchenAid parts.

📞 Call (325) 331-4829

Last updated:

📍 1026 N. 1st Street, Abilene, TX 79601
⏰ Mon–Sat 7am–7pm

All Services

Brands We Repair

Service Areas

📞 (325) 331-4829

Free to call · Mon–Sat 7am–7pm

© 2026 Appliance Repair Abilene · 1026 N. 1st Street, Abilene, TX 79601 · All rights reserved.
Samsung, LG, Whirlpool, GE and other brand names are trademarks of their owners. Appliance Repair Abilene is an independent service and is not affiliated with or authorized by any manufacturer.