Stove Repair Abilene TX | Gas & Electric

Gas Stove vs. Electric Stove Repair in Abilene TX

Texas law requires TDLR licensing for any work on gas appliances — including gas stoves, gas cooktops, and gas ranges. Before any gas stove repair, if you smell gas or suspect a leak, call Atmos Energy at 1-888-286-6700 first. Once safe, call us for the appliance repair.

Most Common Gas Stove Repairs — Abilene TX

Gas burner won’t ignite after haboob — The top stove repair call in Abilene. Caliche and gypsum dust from West Texas dust storms packs into igniter ports and prevents spark. Clean the igniter cap and port with a dry toothbrush and let it dry completely. If it still won’t light, the igniter or spark module needs replacing. Repair: $85–$150.
Gas burner clicking constantly even when off — Moisture or dust on the igniter creates a continuous clicking loop. Clean and dry the igniter cap. If clicking continues, the spark module is shorting: $90–$160.
Gas burner lights but flame is weak or uneven — Clogged burner ports from food residue or haboob dust. Clean the small ports with a toothpick — gently. Do not break anything off inside the port.
Gas burner won’t turn off — Gas valve stuck open. Do not attempt to fix this yourself. Turn off the gas at the shutoff valve and call us. TDLR-required repair.

Electric & Glass Cooktop Repairs — Abilene TX

Electric burner not heating — Coil element or surface element failure. Coil: $65–$110. Glass top element: $120–$200.
Glass cooktop cracked — Thermal shock or impact damage. Glass replacement: $200–$450. We assess repair vs. replace before quoting.
Cooktop won’t turn on after storm — Control board failure from Taylor County lightning. Most common electrical event repair on cooktops: $130–$280.

Repair	Abilene Range
Gas igniter (single burner)	$85–$150
Gas spark module	$90–$160
Gas burner valve	$100–$180
Electric coil burner	$65–$110
Glass cooktop element	$120–$200
Control board	$130–$280

My gas stove won’t light after a dust storm — what should I try first?

Remove the burner grate and cap. Clean the igniter electrode gently with a dry toothbrush — caliche dust is very fine and packs into the gap between the igniter tip and burner cap. Make sure everything is completely dry. Try re-lighting. If no ignition after cleaning and drying, the igniter likely needs replacing — call us.

WHAT ABILENE CUSTOMERS ASK BEFORE BOOKING THIS REPAIR

My gas stove won’t light after a dust storm — what should I try first?

Remove the burner grate and cap from the affected burner. Clean the igniter electrode gently with a dry toothbrush — caliche dust from Abilene haboobs is very fine and packs into the gap between the igniter tip and burner cap. Let it dry completely. Try re-lighting. If still no ignition after cleaning and drying, the igniter likely needs replacing — call us.

Can I use my gas stove if one burner doesn’t work?

Yes — if the gas valve functions normally (gas comes on when you turn the knob) and you light the working burner manually with a long lighter. A failed igniter with a normal gas valve is a nuisance, not a safety issue. A gas valve that stays open when the burner is off is a safety issue — don’t use that burner and call us.

How much does gas stove igniter replacement cost in Abilene TX?

Single gas igniter replacement runs $85–$150. Spark module (controls all burners) runs $90–$160. Both are among the most common repairs we do after West Texas haboob season. TDLR license required for gas appliance work — verify at tdlr.texas.gov.

More questions? Call (325) 331-4829 — we answer our own phone and give straight answers before you book.

Related Resources

→ Oven & Range Repair → Haboobs & Appliances → Cost Guide 2026 → Full FAQ